Multi Color Test Model for Single Extruder without MMU

Model Overview & Print Notes

Changing colors between layers is a known and easy to use feature in Prusaslicer. If you want to change filament within one layer you usually need the MMU. But with virtual extruders and some prearrangements in the model and slicer, this can also be achieved with the regular printer. This little test model consists of two pieces with a color change on the first layer. The first one is like an emboss print with a nice shine-through effect. The second piece has inverted writing, so that the letters form a smooth surface with the background. Be careful when removing the purge at the filament change, don't pull it off but hold it with tweezers till the printhead moves away. By this you will most likely catch also any leftovers on the nozzle. Update 30.01.2024: I did two little modifications to the gcode-file: move the M600 command right in front of the second skirt to get good filament flow and catch any debris set flow rate for the first color to 110% to reach cleaner/better fill and avoid gaps

Files (1)