Simple Crimp Rock Climbing Hold

Model Overview & Print Notes

Rock Climbing Crimp Hold 1 Edit 8/26/23: Added another version with an additional screw hole to prevent turning. The hold has never turned on me but in a boulder I'm setting it will be used as a foothold so the extra screw hole is a preventative measure.  Edit 11/16/23: Fixed dimensions on version with extra screwhole, for #10 screw Description Very nice and small crimp with the smallest bit of incut Hole size is for 5/16-18 bolt with washer and #10 screw, comment if you need a different size Print with Cura's fuzzy skin experimental setting for texture Fuzzy skin settings used: Fuzzy skin thickness: 0.3 (mm) Fuzzy skin density = 3.0 (1/mm) Infill should be at least 30%, with at least 4 walls. It's only a small crimp so it doesn't need to be anything crazy unless you will also use it as a foothold. Dimensions in drawing are in inches. Enjoy! Category: Sport & Outdoors

Files (2)