Coffee Stay Fresh Bag Clip - UPDATED - Aug 16, 2024

Model Overview & Print Notes

NEW Added 200mm clip arm for larger bags.  Updated: 08/16/2024 - added an extended angled version of the insert to accommodate low cabinet clearance. @Leon61 thanks for the suggestion Updated: 04/07/2024 - added an extended version of the insert to help the cap clear the coffee bag. Updated: 5/17/2023 - Cap is pre-scaled up to 104%.  Shout out to Minkix for the original design(https://www.thingiverse.com/thing:4744855). I had made some design changes to remedy issues encountered. Nonetheless, great concept by Minkix!! Sealing grooves edges were too sharp and cutting into the bag breaking the air seal. a. A single rounded sealing groove used instead Insert free-spins b. A notch is added to prevent insert from free-spinning Note: Though coffee bean/ground contact is minimal, using food grade filament for the insert is still recommended. Notes: Insert printed at 0.1mm layer height, 15% infill, 3 lines perimeter with 5 lines of brim Cap printed at 0.1mm layer height, 15% infill, 3 lines perimeter Arms printed at 0.2mm, 15% infill, 3 lines perimeter

Files (9)