THE 100 v1.1 - The fastest 3D printer based on a printed Frame

Model Overview & Print Notes

Description This is THE 100, the fastest 3D Printer based on a printed frame. It does Speedboats in less than 4 minutes and is capable of doing high quality prints in  1/12th  of the time a Ender 3 would need. By the time releasing, The 100 is at the 5th rank of the  leaderboard  of the fastest printers in the world and it's the fastest one that uses a 3d printed frame. And the best thing, this printer  100% open source . Which means if you like this printer and you like to build one by own, you find all resources needed in this model.   Print Settings To print the STL files, a 3D printer with a print bed of at least 230x230mm is required. I've printed all parts out of PLA. If you plan to print ABS/ASA on the printer i would suggest to print the print bed out of a more temprature resistant material. For all STL Parts exept the print bed i've used the following settings: 0.25 Layer height 0.5 Line width 3 Top layers 3 Bottom layers 3 Walls 25% Infill Grid Infill Pattern For the print bed: 30% Infill   The infill of the print bed needs to be slightly higher to move the center of gravity to where the lead screws are attached. This is needed to stop binding on the Z-Axis. Links Bill of Material Standard Edition High Speed Edition Join our Discord Server Support this Project on Patreon View the Video Assembly Guide View the Paper Assembly Guide Follow the Development Our Community on Facebook Printers build by the Community   Specifications Printing Technology: FDM Build Volume: 165x165x150mm Maximum Printing Speed: 400mm/s Maximum Acceleration: 100.000mm/s² Layer Height: 0.1-0.35mm Extruder: BMG Bowden Extruder Filament Diameter: 1.75mm Nozzle Diameter: 0.4 (swappable) Maximum Nozzle Temperature: 300°C Maximum Heatbed Temperature: 110°C Leveling Mode: manual File Transfer: USB Drive, WIFI Rated Power: 350W Supported Filaments: PLA, PETG

Files (55)