Korok Low Poly (from Zelda BOTW)

Model Overview & Print Notes

This little creature does require support for the body. There's pre-sliced and pre-supported files for both Bambu and Prusa.  The colors can be whatever; this can be shades of green, orange, blue. Whatever you have ! The nice color of the body is Mukha PLA by Fillamentum.  Glue required to glue the face to the body, use the nose for simple guidance. AMS requires 3 colors. Feel free to remove the faces you don't want and just print the one you want. This can be shades of green, orange, blue. Whatever you have !   Prusa variants features simple layer changes at certain layers. All pre sliced. Feel free to remove 2 faces you don't want and just print the one you like. The skirt around the print is there to wipe the nozzle !  The top is set to Hilbert curve pattern to give it a bit of texture but you can change that of course.    There's support required for the body. No need for the support in the hole and on the hands. The hole is there if you wish to use a skewer. There's also a base file if you want to have it free standing.  Any questions just ask and happy printing ! 🍀🌿

Files (9)