Relief Map of Switzerland

Model Overview & Print Notes

Update 7 January 2022: reuploaded STL files with manifold errors fixed. Added picture of my print (unfortunately I pushed too far to the printer borders and had some warping, hence the large gaps). This is a relief model of Switzerland. STLs were generated using code from here: https://github.com/IdeaShakerLab/dem-to-stl with data from here: https://shop.swisstopo.admin.ch/de/products/height_models/dhm25200 Digital elevation data on a 200 m raster and country borders from here: https://shop.swisstopo.admin.ch/en/products/landscape/boundaries3D Scale is 1:1'000'000 without vertical exaggeration and there is a 3 km base added (surface of Lago Maggiore, lowest point at 193 m, will have material strength of ~3.2 mm). Feel free to increase vertical exaggeration to your liking (this can be done in most slicers directly by non-uniform z scaling). Large vertical exaggeration may lead to an excessively thick base that may be eliminated also directly in most slicing softwares. This thingy is available as a single STL file (Relief_CH_complete.stl) or cut into six chunks of roughly square shape. Print Settings Printer Brand: Monoprice Printer: Select Mini Rafts: Doesn't Matter Supports: No Resolution: 0.088 Infill: 22% Filament: Generic PLA White Category: Models

Files (7)