Download, slice and print this model in the MakerSpell app — available on Android and Windows. Get the app
Model Overview & Print Notes
I don't know about you but I don't like to wait for my resin print to dry after the IPA (isopropyl alcohol) wash so I designed this fan to quickly dry off the IPA from the resin so I can cure it in the anycubic UV chamber. I noticed the fan cover I got on amazon was restricting the air flow a bit so I made a plastic version that seems quite a bit better but ill leave it up to you. The 120mm fan I used was bought on amazon: https://a.co/d/iiGIpe4 The 140mm fan cover option 2 is on amazon: https://a.co/d/bAD5ACT I printed in PLA and for the feet I used TPU filament. Infill: doesn't matter (I used 30%) Supports: none Layer Height: doesn't matter (I used .18) Raft: none notes: "be careful removing fan bottom from build plate as the walls are thin and can snap or bend."