Phone Stand

Model Overview & Print Notes

Ridiculously over-engineered printed-in-place no support no brim adjustable tilting phone stand.  I like to design things and i also like to challenge myself !  So one thing leads to another even if the design is complete madness ;-) Be advised, this model is not easy to print Consider this model as a torture test for you printer, filament profile and your skills Note that this model can be resized for easier printing, try 120% for example You may also consider trying this simpler and easier to print resizable Phone Stand If you liked this model and want to help me by supporting my hobby Dont’t forget to post your make on Printables and/or Social Media You may also look into my store for my Improved Phone Stand Features Stand is suitable for a 14mm thick phone Notch for a 2.6mm phone charger cable Inclination of the stand is adjustable Slide Out to adjust / Slide In to lock Integrated locking mechanism Resizable at least to 120% Print in place No Support No Brim Print Instructions Print the model on it's side (already in the correct position) Use Default 0.20mm QUALITY Prusa Slicer Print Settings Filament : PLA or PETG Recommended custom settings Paint-on Seam : Highly Recommended Avoid crossing perimeter Infill : Gyroid 15~20% Perimeters : 2~3 Support : No Brim : No

Files (1)