Honeycomb Wall SV06

Model Overview & Print Notes

This fits a 220x220 bed. Made it for my sovol sv06 but will work on any printer with this bed size.   The Gcode is for a 0.6mm Nozzle, printing at 235 Nozzle Temp and 75 Bed Temp. Using Arachne this would put spots all over the bed in the first layer, they didnt stick with my layer. So i used the classic engine and tweaked line width. I avoided crossing perimeters, which is good if you retraction settings arent perfect, which using PETG often are not.

Files (1)