Gridfinity Desk Organizer System - Deskfinity

Model Overview & Print Notes

This 3D-printed desk organizer is designed to work with Gridfinity by Zack Freedman, and the module inspiration comes from my original desk organizer system . Each module in this project is 6U tall and fits perfectly on 2x4 Gridfinity frames . No supports are required. I printed the modules in Jessie PLA at a .25mm layer height and 15% infill with a .4mm nozzle.   Modules Last updated on 12/19/23 EDC Wallet / Cards Module Phone Module Catch-All Wave Module Writing Pen / Pencil Module - Large Pen / Pencil Module - Small Pen + Compartment Module Post-it Module Compartments 2  - Compartment Module 3  - Compartment Module 8 + 1  - Compartment Module Accessories SD Card / Micro SD Card Module USB Module - Large USB Module - Small Get notified when I release new modules. Sign up for my e-mail newsletter .    Additional accessories: * Magnets 6x2mm These slot into the magnet holes in each module's bottom and the baseplate's holes. I opted not to use them in my build. But if you have top-heavy objects in your modules, they may help them stay put during everyday use. ** Rubber bumper pads for feet of baseplates These bumper pads are perfect for the feet of the baseplates. They have enough grip that I didn't need to add magnets or weights to my baseplates to keep the bases in place during regular use.   To complete this project as pictured : Two simple boxes featured in the picture that are not part of my project are from Max's Gridfinity bins - height 6 (42mm) . They are the w1_d2_h6_c1_Fingerslide.stl files. The Gridfinity frames I used are from RIP_Plo-Koon's Gridifinity Magnet Light Baseplate . I printed two of the Gridfinity Magnet Light Baseplate 2x4.3mf models.   Affiliate Link Disclaimer *This link contains an affiliate link for Zack Freedman. This costs you nothing and helps support Zack. **This link contains an affiliate link for me. This costs you nothing and helps support me.

Files (14)