Download, slice and print this model in the MakerSpell app — available on Android and Windows. Get the app
Model Overview & Print Notes
We've created a test print to calibrate your settings printing in ABS/ASA . The test print contains 5mm Dowel pin hole top to bottom This is a 5.3mm hole to compensate for shrinkage 5mm Dowel pin hole side to side This is a 5.3mm hole to compensate for shrinkage M3 Hole including a heatset insert (M3 X D5.0 X L4.0) M3 through hole This is a 3.3mm hole to compensate for shrinkage 0.4mm Single wall to verify .4 print settings Overhang / bridge test in the bottom Overhang test up to 70 ° X and Y lettering to check for ringing. To test this print you need to use the following settings First layer 0.25mm Other layers 0.2mm Wall thickness 0.4mm Walls - Up to you Top / Bottom - Up to you Infill - Up to you Recommended filament ABS