PRUSAMENT Soda Bottle Bird Feeder

Model Overview & Print Notes

Its that time of the year, lots of birds around my home & work so I created this bird feeder that utilizes the PRUSAMENT spool half as a perch for the birds. The threads are PCO1881 specification, so it should fit most soda bottle types. The threads on these models have built-in tolerances for most 3D printers. Print instructions Print Settings: Nozzle: 0.4 Perimeters: 2 Layer Height: 0.2 Supports: No Infill: 15-20% Part Needed: 1 x PRUSAMENT_Bird_Feeder_Base.stl 1 x PRUSAMENT_Bird_Feeder_Locking_Nut.stl 1 x PRUSAMENT_Bird_Feeder_Hook_Split.stl Optional: PRUSAMENT_Bird_Feeder_Hook_Full.stl Assembly Instructions: Step 1: Glue the two halves together of PRUSAMENT_Bird_Feeder_Hook_Split model. Step 2: Add glue the hook to the top of the bottle. I used 3D Gloop. Step 3: Dissemble the PRUSAMENT spool, remove the cardboard insert and separate the halves. Step 4: PRUSAMENT_Bird_Feeder_Base has a keyed notch for the model to align with the spool. Step 5: Add the PRUSAMENT_Bird_Feeder_Locking_Nut to secure the base to the spool so birdseed will not fall through. Step 6: Add birdseed to the soda bottle and thread into the model. Assemble upside-down and turn upright and let the birdseed fill the base.

Files (4)