SD Card Organiser - 6 slots - no support - print as one piece
Download, slice and print this model in the MakerSpell app — available on Android and Windows. Get the app
Model Overview & Print Notes
The organizer was prepared in two versions: complete model - which not needs support, and can be printed in one piece, several parts - in case if someone has problems with bridging. It has 6 slots for SD cards or adapters for micro, mini, and RS / MMC cards (Reduced Size, used eg in Nokia 6630, they are the size of half of the SD card). Inserting and removing cards is quick and easy. In addition, the micro SD card (I had no way to check it with mini) can be pulled out without removing the adapter. In the case of printing the organizer in parts , you need to print: 1 piece of SD_Card_Organiser_Bottom, 1 piece of SD_Card_Organiser_Top_Center_x1, 2 pieces of SD_Card_Organiser_Top_Sides_x2. Parts with the Top name should be inserted into the grooves of the Bottom part. If necessary, sand it with sandpaper, or stick it with glue. A good solution is also to slide them from the side.