Bambu Lab Purge/Flush/Poop💩 bucket for X1 or X1 Carbon

Model Overview & Print Notes

Update 08/06/22 - Updated logo to match Bambu Lab Logo. Inspired by the Purge bucket by Bifrost I created another version with some modifications to suit my needs: 1 - No supports necessary. The logo is now raised, which removes the need for support. 2 - Less filament is necessary. The slanted area is implemented as a wall instead of an extra wall inside the square bucket. 3 - The top cutout is larger so it doesn't block the vent area. 4 - Customizable: You can choose between 2 versions, with or without a logo. I'm also including a file with just the logo that can be printed in multi-color and then glued onto the bucket. By doing this you can print the logo horizontally saving on the wasted filament. I'm including a file for the Bambu Studio with the logo already highlighted for colors and also the logo STL.   Print instructions: In order to fit in the Bambu Lab x1/ x1 carbon make sure you have brim turned off. You don't need brim anyway. I printed with 3 walls and the walls are solid. You can also choose to print with 2 walls but if adding any amount of infill the item will be solid as well. The bucket is 2mm thick. Other than that just default settings.    

Files (4)