Easy Dungeon Tiles

Model Overview & Print Notes

My custom Dungeons and Dragons tiles that I designed to print with the least amount of material possible.  Trigger warning:  unpainted miniatures in the picture.  There are optional magnet holes to connect the tiles together, or if you plan your dungeons right, the walls to an excellent job of keeping the tiles in place.   Magnet holes are designed for a 3.00 x 1.70 mm magnet and kept in place using a quick bonding epoxy.  Magnets source: https://www.amazon.com/200Pcs-Magnets-Miniatures-Refrigerator-Whiteboard/dp/B09NRH97D9/ref=sr_1_1_sspa?crid=1AAH3NY19WVN5&keywords=small%2Bmagnets&qid=1657578032&sprefix=small%2Bmagnet%2Caps%2C141&sr=8-1-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExTkE0RU9YQjBZRkRMJmVuY3J5cHRlZElkPUEwMDUyMDY5MTdGQzFGRlQxSTNSViZlbmNyeXB0ZWRBZElkPUEwMDk4MjIxMldUQ1ZQWDBFNDdKSCZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU&th=1   If you attach the magnets, make sure to apply them in a consistent orientation.  I put a small arrow to show magnet orientation so you keep things straight!  Refer to the images. It can technically print without supports on the outer edges, but I recommend putting some in. Doing this will clean up the corners and such and allow for the tiles to easily stack on top of each other for easy storage. I don't want to open things up to remixing yet, I have a lot I want to customize to go with this (It will happen eventually). The center holes in the tile will be used in future designs.  If you have suggestions or additional accessories you would like to see go along with these, let me know in the comments!

Files (3)