Arcade Joystick Mechanism - 3D printed - STL version

Model Overview & Print Notes

Updated with STL files. Here is my take on a nearly, mostly, almost, more or less completely 3D printed arcade joystick mechanism. Just add microswitches. If you would like some joystick tops to go with this project, check out: https://www.thingiverse.com/thing:5263850 https://www.thingiverse.com/thing:5319591 If you were considering building the smaller version of the mechanism into a stand-alone joystick then check out my designs page for a selection: https://www.thingiverse.com/3dfreeman/designs Also my previously released flightsticks would fit nicely with the Joy_Stem_HS as it is hollow with a side entry point to be able to feed the wiring through. Unfortunately The Raptor's eight switches may pose a problem of too many cables. My future joystick designs will cater for the hollow Stem (Joy_Stem_H) when applicable.   MY PATREON & PATREON SHOP. https://www.patreon.com/3DFreeman You could join up for a month and download the STL files for all my designs or you can now buy bundles from my Patreon shop for $3 If you are after some compatible microswitches, here is an Amazon affiliate link: https://www.amazon.com.au/Abrasion-Resistance-Practical-Fighting-Accessories/dp/B08JY8JYVD?crid=1AQ2WFPWWRERY&keywords=micro+switch&qid=1645807271&sprefix=micro+switch,aps,302&sr=8-19&linkCode=sl1&tag=3dfreeman-22&linkId=4e6cf225c82e429fc227769da5ee03cb&language=en_US&ref_=as_li_ss_tl Cheaper Ebay non-affiliated link: https://www.ebay.com.au/itm/194838749564?hash=item2d5d4b617c:g:~moAAOSw-U5iDKWB&frcectupt=true Thanks for checking out my designs. Print Settings Printer: Adventurer 4 Rafts:  No Supports: No Filament: PLA   Category: Video Games

Files (9)