TVS Apache RTR 310 Multicolor Poster – 3-Color PLA Print

Model Overview & Print Notes

TVS Apache RTR 310 – 3-Color Multicolor Poster 🏍 A flat, multicolor 3D-printed poster inspired by the TVS Apache RTR 310 , featuring a black base with red and white details. Made for Apache enthusiasts, this slim decorative print is perfect for a desk, shelf, workshop or garage. No AMS or dedicated multicolor system required! The colour transitions are arranged by layer height, allowing you to create the three-colour finish using manual filament changes. 🖨 Print Settings Model size: Approximately 120 × 160 × 2.4 mm Tested printer: Anycubic Kobra 2 Neo Slicer: OrcaSlicer 2.2.2 Nozzle: 0.4 mm Layer height: 0.08 mm Initial layer height: 0.20 mm Material: PLA Colours: Black (base), red and white Infill: 15% Walls: 2 Supports: Not required Orientation: Print flat on the build plate 🎨 Colour Changes The included project is configured for manual filament changes at these heights: 1.08 mm — Switch to red 1.32 mm — Switch to white Follow the printer's pause prompts to change filament manually. Keep the prime tower enabled when using the supplied OrcaSlicer project. 📁 Included Files 3MF project: Model and slicer settings for OrcaSlicer. G-code: Pre-sliced file tested on the Anycubic Kobra 2 Neo. The included G-code is printer-specific. Check your machine and filament settings before using it on a different printer or firmware. 💡 Printing Tips Use a clean, properly prepared build plate. Use a consistent PLA brand and colour set for a more uniform finish. Allow the printer to complete each pause and filament change before continuing. The supplied G-code uses a 185°C nozzle temperature; verify that this suits your filament before printing. 🏍 Enjoy the Apache Spirit A compact display piece for motorcycle enthusiasts and fans of the Apache RTR series. This is an unofficial, fan-made decorative project. TVS and Apache are trademarks of their respective owners. This project is not affiliated with, sponsored by or endorsed by TVS Motor Company.

Files (1)