Safe transport tray for miniatures

Model Overview & Print Notes

Transport tray for miniatures which use flexible filament to keep the minis in place. Size information Currently two miniature sizes are supported miniatures with  approx 25 mm (d25) base and approx 30 mm base (d30). The d25 version fits regular 28 mm miniatures, and the 30mm versions fits 120% size 28 mm miniatures. (eg scaled versions of brite minis, ec3d minis) both very much reccomended for easy 3d printet minis!  Print information Layer height 0.2 / 0.3 mm, nozzle 0.4 mm The bottom_plate should be printed on the flat side. The flex_grid  should be printed using flexible filament,  I use easy print tpu 95a, others flexibles might work. If you have not printed flexibles before i recommend doing some research :-)  The cover should be printed on its side, meaning this print is tall. Please print a tester before committing to the full size :-) Assembly instructions   assembly is simple, push the flex_grid over the pegs on the bottom_plate. The cover clips over the bottom_plate.

Files (10)