Yoga Ball Stand - Single Print Bed / 65cm Ball
Download, slice and print this model in the MakerSpell app — available on Android and Windows. Get the app
Model Overview & Print Notes
Found wavexx's great fit together model and tried to print it all in one go but found that the wall parts were just slightly too big to nicely fit inside of the supports. So I increased the hole in the middle by just 3mm to allow for this. I also found that the wall pieces still weren't tall enough to stop the ball from moving entirely while on the stand so I've increased the height of this as well. Note my print photo shows the walls in two colours because I actually had a failed print the first time. I then printed the orignal model's wall parts again and found they were too small. By luck the correct height for my ball at least was the failed parts stuck to the original parts! I then edited the original wall parts to be this new height plus 5mm for luck (total height is now a round 100mm).