Tape Dispenser, Automatic Tape Cutter

Model Overview & Print Notes

Manual tape dispenser with automatic cutting Practical and intuitive, this manual dispenser allows you to cut the adhesive tape with a simple turn of the knob. Ideal for packaging, offices and craft activities, it guarantees precise cuts. compact and easy to use: the perfect solution to optimize your daily work.   Assembly instructions.  Please use extreme caution when performing the following steps and use cut-resistant gloves . Materials needed for assembly. You will need a 9mm blade and 3 screws with a diameter of 3.5mm and a length of about 15mm. Break the blade into three equal parts. Each part should measure approximately 24 mm. Insert three blades into the BLADE HOLDER and screw on the blade cover   Insert both gears into the base, paying attention to the position of the blades. The blade must fit into the small groove. See pictures for final assembly. Insert the tape and stick a part of the tape as shown in the picture, then turn the knob clockwise.

Files (1)