christmas ornaments

Model Overview & Print Notes

christmas ornaments three designs for christmas ornament spheres   dimensions in mm: ~ 76mm diameter   there will be some small overhangs in the top of the sphere, which don't really impact and are not visible as they are on the inside, however if you'd like you can always enable tree supports only for that center section in order to assemble, firmly but gently “massage” the connector into the first half until it's locked in position, then you can just push the other half into place, don't use excessive force otherwise there is a risk of cracking at the patterns   photos show printed in silk and metal pla and the connector in black matte pla (as i printed multiple at once) .40mm nozzle .16 layer height seam at back 10% gyroid infill detect thin walls notes includes bambu studio 3mf file and STLs all photos uploaded are of the actual printed model , and are copyright protected if you enjoy this model please consider to buy me a coffee commercial licence membership available on my patreon

Files (8)