Foldable terrain compatible with 11th Edition - Armored Set

Model Overview & Print Notes

This set of foldable terrain compatible with the 11th Edition and usable in all 28/32mm sci-fi/grimdark wargame is included in, with 5 other sets, in the campaign, available on MyMiniFactory : https://www.myminifactory.com/frontier/11th-edition-foldable-terrain-5745 This set is composed of : -2x three storey buildings -4x two storey buildings -4x small corner ruins -1x short line small ruin -1x short line high ruin -1x long line ruin (1 tower and 2 side ruins) -1x container and 1x double container The whole set has been designed to be compatible with FDM printer only and doesn't need support. All models can be printed in multicolor (.3mf file included) I recommend the following printing parameters : Nozzle : 0,4mm Layer : 0,2mm Infill : 5% Infill pattern : Adaptive Cubic Brim type : Outer Brim Only I also recommend to print the version of the three storey buildings which included stabilizer, to reduce the chance the model falls during the print and improve the stability and quality. You should need between 1.5 and 1.7kg of PLA to print a full table depending the option you chose (Details in Part_List_&_Assembly.pdf). Buildings footprint are available for free here : https://www.myminifactory.com/object/3d-print-w40k-11th-edition-building-footprint-free-813250

Files (4)