Crystal Formation with Base

Model Overview & Print Notes

A simple crystal structure with a base. Perfectly suitable as a fantasy decoration and freely scalable. Printing tips:   The base is designed to be heavier and stands stably thanks to a wall thickness of 3 walls. With an infill of only 5%, material is saved! The model is equipped with optimal settings for Silk PLA. Of course, you can also print it much faster, but this usually comes at the expense of shine. Depending on the filament, however, you can gladly increase the speed for the outer walls again.   There is another model with a different base that has been perfectly scaled and optimized for D&D. You can find this in my profile! Note:   The ghosting in the image comes from the fact that my A1 mini was not standing properly and was wobbly. Normally, the print looks nicer. A reprint of the model with a corrected stand and uncalibrated new filament then looked like this:   Should there be any problems with the model, feel free to contact me, I will try to help! Of course, you are also welcome to subscribe to my TikTok channel and become part of my community there and reach me faster!   A few words from the designer:   I would like to point out at this point that I am not a professional. Not all of my creations are always 100% perfect, but always tested and worth uploading!

Print profiles