Download, slice and print this model in the MakerSpell app — available on Android and Windows. Get the app
Model Overview & Print Notes
voronoi sphere minimalist decorative voronoi sphere in two sizes pieces dimensions in mm: standard ~ 70mm diameter mini ~ 50mm diameter you will need to clean the brim (easier to do with a small deburring tool), and you may run into some stringing due to the geometry, especially if the filament isn't fully dry · this clears aways easily with a couple of passes with a heat gun the profile has fuzzy skin enabled to give a textured look, which also makes it consistent as there are some overhangs photos show printed in different matte and marble plas .40mm nozzle .16 layer height 10% cross hatch infill fuzzy skin on all walls (0.2 / 0.2) notes includes bambu studio 3mf files and STLs (70 and 50 mm) all photos uploaded are of the actual printed model , and are copyright protected if you enjoy this model please consider to buy me a coffee commercial licence membership available on my patreon