Mil Box Sectioned Rugged print in place container

Model Overview & Print Notes

This is a very durable box that is sectioned in 6. It is printed in place (printed as one piece, on one plate, in one print).   This box is water resistant but not water proof meaning water will get into the box if submerged for a longer period of time (you could use a small amount of silicone to make it waterproof though). You could use this box for many things including but not restricted to: camping, hiking, fishing ect. This box does make a good small essential fishing box.   Note that the latch is stiff (this is on purpose so the box doesn't pop open when not intended to) but this latch will get looser over time (It will be very tight the first 5-10 times you open it). Each compartments internal dimensions (Total storage capacity) are 41mm x 28mm x 30 +4mm (LxWxH) (x6 compartments). And external dimensions (Total area of space the box takes up) of 140mm x 90mm x 45mm (LxWxH).   ATTENTION people of Makerworld, it has come to my attention that this model is very similar to another's. Though this model is not based on YogiTech's Model, there are many distinctive similarities. As these are highly similar i see it fair to share YogiTech's model. You can find it here> https://makerworld.com/en/models/38255#profileId-42959 Go check YogiTech's model out, it seems to be of good quality!

Print profiles