Heritage Elegance – Christmas Bauble Bowl

Model Overview & Print Notes

Heritage Elegance – Christmas Bauble Bowl Inspired by the charm of Christmases past, Heritage Elegance brings classic vintage ornamentation into a modern form. Delicate holly, evergreen branches, and intricate baroque flourishes wrap around this generously sized bauble, finished with an ornate golden cap. The removable lid lifts away to reveal a spacious bowl, perfect for festive sweets, chocolates, or little treasures. Equally lovely as a decorative centerpiece , displayed on a Christmas table, mantelpiece, or nestled among evergreen branches and twinkling lights. The decorative knob is a separate screw-on part , allowing you to print it in a contrasting color without needing an AMS or multicolor printing. Simply print the pieces separately and screw the knob onto the lid. A touch of old-world elegance for the modern Christmas home.   You can find a Medium Sized complemental Christmas Bauble Bowl here: https://makerworld.com/en/models/3521186-emerald-heirloom-christmas-bauble-bowl#profileId-4024785 (3rd smaller size soon to be released)   For more Christmas and winter decorations, go here : https://makerworld.com/en/collections/38546964-swee-christmas-winter-models ( More models will soon be released ) Dimensions (Approximate) Bowl without lid Height: ~10 cm (3.94 in) Width: ~18 cm (7.09 in) Removable lid Height: ~5.1 cm (2.01 in) Width: ~15 cm (5.91 in) Filament Used Red: PLA Sparkle (Crimson Red - 13200) - Bambu: https://us.store.bambulab.com/products/pla-sparkle?id=41002885382280 Gold: Silk PLA-GIANTARM: https://www.amazon.com/dp/B08F9WS9D4?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_16   Printing Use a clean print plate with some glue (unless you are using a super tack plate) Use dried out filament Different filament types impact the print and model differently, please adjust your settings accordingly. Support Removal: Let the model cool down before removing the supports. Use pliers when removing the supports. Start with breaking the support in the middle by “crushing” them by using a plier. This helps loosen the structure before removing the supports. Move to the top and work your way downward. Gently "wiggled"/pull downwards there might be a larger section that gets removed at the same time Light sanding and gentle, controlled heat may be needed to clean up areas where the supports were attached. I used a handheld mini torch, but apply heat carefully to avoid warping or damaging the print. If you like this design, please consider leaving a rating, a comment or a boost. Boost Me Inspired by Christmases past, created for Christmases to come. If you love this design, we would be grateful for a Boost! Membership Turn your prints into something more! My Commercial Membership gives you permission to sell physical prints of this design, making it perfect for craft fairs, markets, or your own small 3D-printing business.

Print profiles