World of Warcraft Abomination tabletop D&D figure

Model Overview & Print Notes

Fantasy tabletop Abomination figure inspired by the WoW: Wrath of the Lich King board game. Whether you need to replace lost there or simply like the design, you can now print this yourself. They have been uploaded in two different sizes: the smaller figure (approx. 32mm tall) match the piece found in the original board game, while the 54mm version were scaled to make painting and printing easier. The smaller figure are recommended for resin printers and the larger one for FDM printers, though they can naturally be scaled to any size.   Recommended FDM print settings: Material: PLA Layer Height: 0.08 mm (for the maximum detail) or 0.12 mm (for a great balance of speed and quality). Supports: Yes. I recommend using Tree/Organic supports. Due to the complexity of the model, removing the supports may be somewhat difficult in places. Use tools like a flush cutter and razor where needed. Nozzle: 0.4 mm standard (If you want to push the limits, try a 0.2 mm nozzle for incredible micro-details!). Infill: 15%   Recommended SLA print settings: Material: doesn't matter. Layer Height: 0.01 mm (for the maximum detail) or 0.03 mm (faster print but good quality). Supports: Yes.    

Print profiles