Desk Recycling Bin - Adjustable Clamp-On

Model Overview & Print Notes

🔧 New Reinforced Single-Color Print Profile A new single-color print profile has been added with extra reinforcement in the clamp area. The main model remains lightweight at 2 walls / 15% infill , while the clamp uses 3 walls and the potentially weak high-stress area is locally reinforced with 8 walls / 70% infill .     This is a clamp-on recycling bin for a desk, shelf, or workbench edge. One printed thumbscrew clamps to surfaces from 10 mm to 40 mm thick. The bin attaches to the bracket with a tapered, cone-shaped dovetail. Instead of lining up a straight dovetail by eye, the taper centers the bin as it slides on. To empty it, lift the bin straight up and off; the bracket stays clamped to the desk. Three parts total: bin, bracket, and screw. No metal hardware. Two print profiles are included: AMS/multicolor (black body, colored rim and recycling icon) and single color/no AMS.   ### Dimensions | Width | 145 mm | | Height | 125 mm | | Depth | 80 mm | | Clamp range | 10-40 mm |     ### Print details   - Parts: 3 (bin, bracket, screw) - Profiles: AMS/Multicolor, Single Color/No AMS - Material: PLA or PETG - Weight: 175 g - Supports: none - Nozzle: 0.4 mm   ### Assembly   1. Print the bin, bracket, and screw. 2. Thread the screw into the bracket. 3. Clamp the bracket on the desk edge and hand-tighten the screw against the underside. Snug is enough. Don't overtighten. 4. Line up the bin's dovetail slot with the bracket's rail and slide down. The taper centers it. 5. To empty, lift the bin straight up and off.   The bin uses the same bracket and clamp: Desk Organizer

Print profiles