1/4

MakerWorld✓ Verified Model
Model rocket
⬇ Downloads8
♥ Likes6
👁 Views—
⚙ Print ReadyPrint Ready
Download, slice and print this model in the MakerSpell app — available on Android and Windows. Get the app
Model Overview & Print Notes
Compatible with the B4-4 motor (69mm x Ø18mm) which is legal in most of the world, including Europe. Reaching an apogee of around 80-100 meters at speeds up to 38 m/s and 117 m/s² max acceleration. The parachute is secured with 2x M3 bolts. The parachute should weigh in at around 10-15 grams. The launch system requires a rod (6 mm for this design) for the rocket to steer in the first meter or two. The B4-4 motor has a parachute discharge that triggers 4 seconds after burnout, therefore make sure that the nosecone isnt too loosefitting or too tight (I used electrical tape to add diameter and sandpaper to take material off).
Print profiles
3MF / PROFILE
0.2mm layer, 1 walls, 15% infill

💬Baskı İncelemeleri & Yorumlar(0)
★4.9 / 5.0· Başarılı Baskı