Gardena Quick Connector Y-Splitter, G3/4, Hose

Model Overview & Print Notes

Here you can find more fittings :-) 🧩 Gardena Quick Connector Y‑Splitter – 1 Inlet, 2 Outlets This adapter adds a practical Y‑distributor to the Gardena connection system: One Gardena quick connector is plugged directly onto the tap or an existing connection and then provides two outlets. Ideal for operating two hoses, devices or irrigation lines at the same time. 🔧 Variants Gardena Quick Connector to Gardena Connection Classic Y‑distribution fully within the Gardena system. Perfect if both outlets are to be used with Gardena connectors again. Gardena Quick Connector to G3/4’’ BSP Thread For maximum flexibility: The outlet has a standard G3/4” BSP external thread, ideal for connecting additional adapters, filters, solenoid valves or special connectors. Gardena Quick Connector to Hose Barb D13 (½") Direct connection of 2x 13mm (½“) water hoses without additional adapters. Simply push the hose on and secure it with a hose clamp.   Assembly note for Gardena connection and connector: A standard Gardena sealing ring (rubber ring) is required for a 100% seal. Gardena Standard Dimensions: 16 x 11 mm (outer diameter x inner diameter) / cord thickness: 2.50 mm Gardena Profi-System Dimensions: 22.3 x 17 mm (outer diameter x inner diameter) / cord thickness: 2.65 mm The printed TPU sealing disc is required for the connector (print plate 2)   Boost Me Support my projects so that more clever 3D ideas can become reality. Every boost helps me develop new designs for the community.

Print profiles