Plant Watering Spike - Soil Water Diffuser - Set 4

Model Overview & Print Notes

Membership Join the Component Commercial License Membership to sell physical 3D-printed products made from eligible Component models. Boost Me ❤️ One click. Real support. Thank you. ❤️ ⚙️ Helps build the next Component tool. A simple plant watering spike designed to guide water deeper into the soil and distribute it through side holes. Use it for pots, planters, garden beds, tomatoes, herbs and houseplants when you want water to reach below the surface instead of staying only on top.   Illustrated size and use guide Compare the original model views, nominal dimensions and use notes below. Dimensions are in millimetres at 100% print scale. Reference views are not to scale. ⚙️ Key Features 💧 Guides water deeper into the soil 🌱 4 flow variants for different watering needs 🪴 Designed for pots, planters and garden plants 🎯 Direct Flow version for directional watering 🧩 One-piece print, no assembly required 🖨️ A1 mini 3MF print profiles included 🛠️ Clean, functional garden tool design 📦 Included Fine Flow STL and 3MF Medium Flow STL and 3MF Fast Flow STL and 3MF Direct Flow STL and 3MF Set of all 4 variants A1 mini full set print profile A1 mini individual plates print profile 🌊 Flow Variants Fine Flow : smaller hole pattern for slower water release Medium Flow : balanced version for everyday use Fast Flow : larger holes for faster water distribution Direct Flow : larger holes on one side for directional watering toward the root area 🎯 Direct Flow Note The Direct Flow variant has larger holes on one side only. The small cut-out on the top rim indicates the watering direction. Rotate the spike so the cut-out points toward the root area or the part of the soil you want to water. 🧰 Best For potted plants houseplants garden beds tomatoes and herbs larger planters root-area watering 🖨️ Print Notes Layer height: 0.20 mm Walls: 3 Infill: 15-25% PLA for indoor use PETG recommended for outdoor use or longer contact with moisture Print profiles prepared for Bambu Lab A1 mini 💧 How to Use Insert the spike into the soil near the plant. Pour water into the top funnel. Let the water flow down through the side holes. Choose the flow version depending on soil type, pot size and watering needs. ⚠️ Notes Water flow depends on soil density, hole pattern, print quality and material. For outdoor use or long-term contact with moisture, PETG is recommended. Boost Me ❤️ One click. Real support. Thank you. ❤️ ⚙️ Helps build the next Component tool. 🔗 More from Component Plant Watering Spike - Deep Watering Stake Broom Holder - Strong Grip Wall Mount - 5 Sizes Broom Holder - Tool Wall Mount - 5 Sizes Self Watering Plant Ring - 7+ Day Water Reservoir Clothespin Clip Clamp - Laundry Peg Utility Carabiner Clip - EDC Accessory

Print profiles