Download, slice and print this model in the MakerSpell app — available on Android and Windows. Get the app
Model Overview & Print Notes
checkout our other designs: This is a fully 3D-printable eyewear design that you can print, finish, and assemble entirely at home. It requires no screws, hinges, or extra hardware—all you need is some super glue and a bit of post-processing to get a clean, functional pair of glasses. This model is designed to support standard lenses, making it both a stylish accessory and a practical daily wear option. Buying Lenses for the glasses: EU: I found Lens4Glasses to be an affordable option that ships across the EU. Germany : https://www.optiker-salmen.de/termin UK : https://lensology.co.uk/non-prescription-lenses/ US: https://www.laramyk.com/stock-lenses/?utm_source=chatgpt.com Key Features Two Sizes Included: Comes in two different sizes to help ensure a proper fit for different face shapes. Lens-Ready: Designed to accommodate both standard non-prescription lenses and prescription lenses. 100% Hardware-Free: No need to source tiny screws or specialized hinges. Easy Assembly: Simple joint design secured with a small amount of super glue. Recommended Print Settings To ensure the best surface finish and structural strength, the following settings are recommended: Layer Height: 0.10mm to 0.15mm (highly recommended for smoother curves and easier sanding) Infill: 40% – 50% Supports: Required. You will need to enable supports for the curved sections of the temples (the arms that go behind the ears). Material Compatibility This model has been tested with several filaments, and you can print it using almost any standard material: Bambu PLA-CF: Highly recommended. The carbon fiber texture provides a premium matte finish and excellent structural rigidity. Wood PLA: Gives a unique, organic aesthetic. It looks great but will require extra sanding and finishing to get a smooth feel. Standard PLA/PETG: Works well and offers a wide range of color choices. Assembly & Post-Processing Sanding: To achieve a comfortable fit and clean look, thoroughly sand the frames and temples. Start with a coarser grit (like 220) to smooth out print lines, and finish with a wet sand (400 to 1000 grit) for a smooth surface. Dry Fit: Test-fit the temples into the frame joints before applying any glue to ensure they align properly. Gluing: Apply a very small drop of super glue (cyanoacrylate) to the connection points. Hold the pieces firmly in place Lens Installation How to install: Standard scanned or custom-cut lenses can be snapped directly into the frame from the inside. Important Note: Do not apply heat (such as hot water or a hairdryer) to the frame during installation. Heating the plastic can cause the printed frame to warp or lose its shape. The lenses are designed to snap into place easily at room temperature. Boost Me Enjoying this design? If you'd like to support the future of Dot Eyewear, consider giving this model a Boost. Your support helps me continue designing new printable eyewear, refining existing frames based on community feedback, and growing this project. Thank you for being part of the journey!