Fiber-Mate

Model Overview & Print Notes

I started messing with Polymaker Fiberon, and unfortunately, since they make .5 KG spools, they have a larger diameter cardboard center when you do the Polymaker Rip. When you applied the printed spool, it wouldn't grab and would simply spin.   I decided to make my first adapter. This has a notch to allow the tab on the spool to grab, and a tab of its own to lock the Fiberon spool in. It fits TIGHT. You need to make sure you get all glue and extra cardboard off.   Due to material this is intended for, highly recommend ASA for material used, at minimum.   Printed on my Bambu Lab H2C.

Print profiles