DotGrip Ultimate - Bed Plate Cleaner

Model Overview & Print Notes

DotGrip Ultimate - Bed Plate Cleaner Is the next evolution of the original DotGrip Bed Plate Cleaner — redesigned, refined, and upgraded for better performance and usability. 🔧 Key Features 🔹 Self-Tensioning Design with Micro Teeth The upgraded construction features integrated micro teeth (spikes) that bite into the microfiber during assembly. When the parts are pressed together: The teeth grip the fabric securely The material is automatically stretched across the surface Tension is evenly distributed with no loose edges This results in a perfectly flat and stable cleaning surface every time. 💡 TIP – Perfect Microfiber Shape For the best fit and easiest assembly, use the DotGrip Ultimate Cleaner bowl as a template for cutting your microfiber. Cut the microfiber to exactly the same size as the bowl, or slightly smaller. A microfiber piece that is too large may create excess material around the edges, while a slightly smaller piece will allow the self-tensioning mechanism to stretch it perfectly into place.   🔹 Larger Cleaning Surface Now sized at 60 × 60 mm , giving you: Faster cleaning of larger print beds Better coverage with fewer passes 🔹 Snap-Fit Assembly Simple and satisfying click-fit design No glue, no screws Easy to assemble and disassemble when needed 🔹 No Supports Required All parts are designed for support-free printing Clean prints straight off the build plate Faster and more material-efficient production 🔹 Precision Fit & Tested Design Carefully tuned tolerances Secure hold on microfiber Reliable performance after repeated use 🔹 Included Storage Basket (in print profile) Keeps your microfiber clean and dust-free Practical addition for workspace organization 🧩 Assembly Manual Step 1 – Prepare microfiber Cut or place a piece of microfiber slightly larger than the Clamp (Part with Teeth) - approximately around 5 mm bigger   Step 2 – Position the fabric on the Last Lay the microfiber over the inner frame (the biggest part - and the highest).   Step 3 – Align the Clamp - the one with teeth - direction of the teeth as per picture below Place the top cap evenly on the microfiber.   Step 4 – Press to snap-fit Firmly press clamping part slowly - check in the meantime if micro-fibre is placed evenly - once ok, press further parts together until they click. ➡️ During this step, the micro teeth will grip and stretch the fabric automatically . 🧼 Why You’ll Love It DotGrip Ultimate isn’t just bigger — it’s smarter. The combination of self-tensioning geometry and micro teeth gripping system eliminates uneven pressure and loose fabric, giving you a consistently smooth cleaning experience. Perfect for keeping your print bed spotless and improving first-layer adhesion. If you liked the original, this version will feel like a true upgrade in every way .

Print profiles