T-shirt Print - Naruto

Model Overview & Print Notes

Instructions 🛠️👕 Download the model and open it in Bambu Studio 💻 After printing, carefully remove the model from the build plate . ⚠️ Avoid sudden movements — the model is only 0.3 mm thick and can be easily damaged or torn. Prepare your ironing area : set up an ironing board and an iron, then preheat the iron 🔥 Place the T-shirt on the ironing board, position the printed model on the desired area , and cover it with heat-resistant paper (e.g. baking/parchment paper) 📄 Using the preheated iron, press onto the model (or move the iron evenly, depending on the size of the model) for 15–20 seconds ⏱️ Wait a moment , then remove the paper. The model should separate easily and remain on the T-shirt ✅ (Optional) Turn the T-shirt inside out and iron the area where the model is applied for an additional 5–10 seconds 👕✨ Important :⚠️ T-shirts with prints should be washed at a temperature not exceeding 50°C (122°F) . Washing at higher temperatures may cause the model to peel off from the fabric 🧼🌡️ Boost Me

Print profiles