Modern Self-Watering Planters (x4)

Model Overview & Print Notes

Boost Me If you enjoy my designs and want to support me, a Boost is always appreciated! Axis · Prism · Orbit · Seed — Modern Self-Watering Planters (x4) A set of four self-watering planters with distinct proportions and a shared architectural design language. Each model is optimized for clean external walls, strong layer bonding, and gap-free bottoms. Print profiles are included in the 3MF files and are best used with Bambu Studio. 1. Seed — 137 × 137 × 80 mm Small rounded bowl planter A compact, balanced form made for young plants, propagation, or minimal compositions. Print settings Print profiles are included in the 3MF file . For best results, use Bambu Studio . If you are not using MakerWorld profiles but print on a Bambu Lab printer, use the settings below: Global settings Outer wall: 0.49 mm Slice gap closing radius: 0.01 Resolution: 0.001 Bottom shell layers: 8 Modifier Wall loops: 1 Sparse infill: 0 Ensure vertical thickness: disabled Insert Wall loops: 3 Inner wall: 0.6 mm Seam position: Back Wall generator: Arachne 2. Orbit — 177 × 177 × 100 mm Large rounded bowl planter A wide, low-profile planter with a continuous curved silhouette, ideal for spreading or trailing plants. Print settings Print profiles are included in the 3MF file . For best results, use Bambu Studio . Global settings Outer wall: 0.49 mm Slice gap closing radius: 0.01 Resolution: 0.001 Bottom shell layers: 8 Modifier Wall loops: 1 Sparse infill: 0 Ensure vertical thickness: disabled Insert Wall loops: 3 Inner wall: 0.6 mm Seam position: Back Wall generator: Arachne 3. Prism — 160 × 185 × 100 mm Faceted polygon planter A sculptural, multi-faceted vessel that plays with light and shadow while keeping a compact, grounded form. Print settings Print profiles are included in the 3MF file . For best results, use Bambu Studio . Global settings Outer wall: 0.49 mm Slice gap closing radius: 0.01 Resolution: 0.001 Avoid crossing walls: On Bottom shell layers: 10 Ensure vertical thickness: disabled Only one wall on top surfaces: Not applied External Top surface pattern: Concentric Modifier Wall loops: 1 Top surface pattern: Concentric Sparse infill: 0 Generic cylinder Wall loops: 3 Top surface pattern: Monotonic Insert Wall loops: 3 Outer wall: 0.5 mm Inner wall: 0.6 mm Seam position: Back Wall generator: Arachne 4. Axis — 100 × 100 × 160 mm Tall square planter A vertical architectural planter with rigid geometry, designed to anchor space and support upright growth. Print settings Print profiles are included in the 3MF file . For best results, use Bambu Studio . If you are not using MakerWorld profiles but print on a Bambu Lab printer, use the settings below. Axis contains 4 separate parts: External Wall loops: 1 Top surface pattern: Concentric Sparse infill: 0 Vertical shell thickness: Disabled External 2 Wall loops: 5 Top surface pattern: Concentric External Bottom Wall loops: 1 Detect thin walls: On Infill combination: On Bottom border Default settings Insert Outer wall: 0.5 mm Inner wall: 0.5 mm Wall generator: Arachne NOTE: For best results, you can add a cotton or synthetic wick through the insert into the reservoir. The wick helps draw water up gradually, improving consistent moisture delivery and absorption at the root level. This keeps the growing medium evenly hydrated, reduces watering frequency, and supports healthier root development without the risk of overwatering.   Membership If you’d like to sell physical prints of these designs in your shop or marketplace, you can join with a commercial license. 🚀

Print profiles