Sonic the Hedgehog articulated figure, no AMS printing

Model Overview & Print Notes

2025.12.5 Update: Added hair split into two parts (front and back), no need to remove supports, to prevent hair tips from breaking   Sonic the Hedgehog, articulated , approximately 12.5cm tall. Multi-part and multi-color, no AMS required To ensure tight joints, some areas require a bit of force to assemble. Please pay attention to the direction of force when assembling to prevent parts from breaking. Please also be careful when moving the joints, as these are not industrial mass-produced products and their strength is limited (even mature products from Bandai and Kaiyodo can have broken axles, broken joints, or loose joints) I printed and adjusted the joint tightness using Bambu Lab's PLA Basic filament. Please avoid using filaments with poor layer adhesion, such as matte or silk, on stressed parts, as they may break Due to variations in 3D printers and filaments, the tightness of the joints you print may vary. Simple filing or a thin coat of super glue to increase thickness should allow for proper adjustment I have also made other things, feel free to visit my homepage to check them out:   Zootopia 2 is about to be released, would you like to 3D print Judy Hopps and Nick Wilde to watch the movie with you They are also fully articulated and have movable eyes Also, Nezha and his good friend Ao Bing, also articulated Does anyone like Dragon Ball Goku, Vegeta, Kid Goku, Kid Trunks, Krillin, articulated What about Pikachu also articulated  

Print profiles