Halloween Hairpin

Model Overview & Print Notes

Add a subtle spooky touch to any hairstyle with this set of 3D-printed Halloween hairpins. The designs are clean, cute and print-friendly: a floating Ghost , smiling Spider , minimalist Skull , winged Bat , chibi Skeleton , and bunny mask . Each model is optimized as a lightweight hair fork/hairpin with smooth contours, rounded edges, and through-cut eyes/mouth for that crisp silhouette. What’s inside 6 fronts + matching flat backs (for two-piece “slide + stick” use). One-piece 2-prong hair-fork versions. Mirrored files where relevant. Recommended print settings Material: PLA or PETG (PLA+ holds shape well). Nozzle 0.4 mm, layer height 0.16 mm (0.12 mm for finer edges). Walls: 3–4 perimeters; Top/Bottom: 4–5; Infill: 15–20% (Grid/Gyroid). Orientation: print fronts/backs flat on the bed; print sticks/forks vertically with a brim (no supports). Bed adhesion: build-plate glue or 3–5 mm brim for forks. Assembly & fit Use the two-piece “slide” with a separate stick, or the one-piece 2-prong fork. Lightly sand mating faces; optionally add a tiny drop of CA glue for permanent sets. Smooth any edges that contact hair. Finishing ideas Prime + acrylics; seal with matte varnish. Classic palettes: bone beige, coal black, warm gold; or pearlescent accents for highlights. Take a look at my other models

Print profiles