Booknook Lord of the rings

Model Overview & Print Notes

Lord of the Rings bookends, the flames of the earth's depths rising the Balrog   Ideal for adorning your Tolkien collection in a library   The LED lamp comes from Amazon: https://amzn.eu/d/agWvA37   Hueforge Settings   Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 99x218mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 1.1mm and the Actual Depth is 1.2mm Filaments Used: PLA BambuLab Basic White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Red Transmission Distance: 4.5 PLA+ Esun Brown Transmission Distance: 1.5 This print uses 5 unique filaments Swap Instructions: Start with White At layer #2 (0.24mm) swap to Yellow At layer #6 (0.56mm) swap to Orange At layer #11 (0.96mm) swap to Red At layer #12 (1.04mm) swap to Brown for the rest.  

Print profiles