Plant Watering Bird – Self-Watering Helper

Model Overview & Print Notes

Keep your plants happy even when you're away! This charming bird slowly releases water into the soil through its ultra-thin base , providing hydration over 12–24 hours (depending on soil type). Ideal for indoor/outdoor pots and tropical plants that prefer consistent moisture as well as plants in the garden. The porous base design uses the natural micro-permeability of thin 3D-printed walls to gently drip water into the soil—no electronics, no hassle. 💧 How to Use: Fill the bird's back with clean water. Insert into soft soil near the plant. → For older or densely rooted plants, pre-make a hole with a stick to avoid damaging roots or the bird. The bird will slowly water your plant over time. Refill as needed—usually every 1–2 days. 🧵 Material Suggestions: PLA is perfect for this print! Its micro-permeability at thin walls is the key to the slow-drip effect. No supports required; use standard 0.2mm layer height for best results. Light colors help monitor water level more easily. Note: I was inspired for the shape of the upper part by a similar plant watering gadget in my garden. Boost Me 🐥 Like this design? Follow for more plant-friendly prints and give it a boost to spread the garden love! More models from me: https://makerworld.com/de/models/1342264-seed-dipper-3-in-1-garden-tool

Print profiles