Sonic the Hedgehog Multipart Figure No AMS

Model Overview & Print Notes

This model is designed to be printed in Multicolor using any 3D printer, without the need for an AMS. The model is split into separate parts based on color. Simply print the plates in the corresponding filament colors and assemble them like a 3D puzzle. Assembly & Tolerances This model is designed with a 0.2mm offset between parts. First Step: Print the "Test Piece" (Index Finger) in White. Troubleshooting: If it fits well: Perfect! It might be hard to remove later, so be careful. If it doesn't fit: You need to adjust the "X-Y Contour Compensation" and "Hole Compensation". Too Tight? Try setting -0.02mm for the contour and +0.02mm for the hole. Too Loose? Do the opposite: +0.02mm contour / -0.02mm gap. Glue: The eyes require glue. For the rest, glue is recommended for a solid finish. The Wings Logo (Color Change) Note: The "Circle with Wings" is not multipart. It is printed in one piece using pauses (filament changes). If you print at 0.32mm layer height, follow these steps: Start: White filament. Layer 4: Pause and change to Yellow. Layer 7: Pause and change to Blue (until the end). Print Settings Layer Height: 0.32mm (Recommended). This creates a cool texture and prints very fast! Infill: 10-15% Gyroid. Brim: Recommended for smaller parts. Extra: Sonic has a small hole on the back so you can hang it on the wall. Colors Needed To get the result in the photos, you will need: Blue: Body and head spikes. Beige/Skin: Arms, belly, and face. Red: Shoes. White: Gloves, socks, and eyes. Black: Nose and base. A1 Mini Users A specific profile for Bambu Lab A1 Mini is available. Figure, Base, and Wings included. Everything fits perfectly at 81% scale.   I hope you like it and enjoy the model!   Complete the Collection! Don't miss the other friends and versions: Tails is available here: https://makerworld.com/es/models/1790010-tails-multipart-no-ams#profileId-1907563 Sonic the Hedgehog Keychain Two Sided: https://makerworld.com/en/models/2770572-sonic-the-hedgehog-keychain-two-sided#profileId-3077396 Christmas Edition (Lightbox): https://makerworld.com/es/models/2033893-sega-christmas-lightbox#profileId-2193698   Boost Me If you liked this model, your Boost really helps me keep creating new designs 🧵 Want to go the extra mile? You can help me create new designs by joining my team! Support my work here: https://ko-fi.com/luzia3dstudio  

Print profiles