Original 3D Benchy

Model Overview & Print Notes

Print the classic 3DBenchy boat to check your 3D printer’s overhangs, bridging, surface quality and dimensional accuracy.   Choose the Normal print profile for the standard-size benchmark. Mini, keychain, multicolour and textured variants are also available.   Original 3DBenchy design by Creative Tools . Print profiles and additional variants prepared by 3D Print Concepts.   Tips for printing: Filament: PLA Layer height: 0.2mm ( optimal ) Wall loops: 2 Infill: 10 % Gyroid Print Profiles: Normal Version! Mini Benchy Version (50%, 75%, 35%, 50% and With Keychain) Mini Benchy 50% Medium Benchy 250% BIG Benchy 500% Speedy Benchy - 16min A1M Optimized P1S Optimized P2S Optimize A1 Optimized X2D Optimized H2S Optimized H2D Optimized H2C Optimized Keychain Version! Multi Colored Version (H2C Test) Low Poly Version Wooden Benchy Version ( Made with Bump Mesh by CNCKitchen) Hexogon Benchy ( Made with Bump Mesh by CNCKitchen) Stone Benchy ( Made with Bump Mesh by CNCKitchen) Brick Benchy ( Made with Bump Mesh by CNCKitchen) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Bridge roof length The front and rear surfaces of the roof are parallel at a distance of 23.00 mm.     Chimney roundness The cylindrical hole and outer top part of the chimney measure 3.00 and 7.00 mm in diameter. The depth of the blind hole measures 11.00 mm.     Horizontal overall-length #3DBenchy’s horizontal overall-length from bow to stern measures 60.00 mm.     Horizontal overall-width #3DBenchy’s horizontal overall-width from port to starboard measures 31.00 mm.     Vertical overall-height #3DBenchy’s vertical overall-height from top to bottom measures 48.00 mm. The top of the box measures 15.50 mm above the bottom surface.    

Print profiles