Fidget Spinner Ring Collection

Model Overview & Print Notes

Introducing The Fidget Spinner Ring Collection This is a set of 6 Fidget Spinner Rings.   For 6 More Rings check out Pt. 2 here: https://makerworld.com/en/models/2976386-fidget-spinner-ring-collection-pt-2#profileId-3338813   All rings Available in US sizes 5 - 15. Sizing US Size | Inner Diameter (mm) 5 | 15.7 mm 6 | 16.5 mm 7 | 17.3 mm 8 | 18.1 mm 9 | 19.0 mm 10 | 19.8 mm 11 | 20.6 mm 12 | 21.4 mm 13 | 22.2 mm 14 | 23 mm 15 | 23.8 mm Printing Print Profiles attached contain all sizes and are pre colored. Rings print in 2 pieces . Easily snap them together as shown in the 3rd image . Print Profiles print each part separately to save time and filament with AMS. Create your own colorway by matching different filament to each color group. Use your fanciest or shiniest filaments for best results. All rings use the AMS for multicolor, but can be made single color. Rings are designed to be printed at a 0.2mm layer height with a 0.4mm nozzle. 0.2mm nozzle not needed, but may give better results at the expense of time. Printing times are around 20 minutes (0.2mm layer height with a 0.4mm nozzle). Rings may run tight due to interior roughness and print tolerances, be prepared to sand the inside or go up a size. For best results remove any bumps around the z seems or elephants foot with a deburring tool, knife, or sand paper. Please share your Colorways!   Boost Me If you're feeling generous!

Print profiles