Mini Food Series | New Generation of Printing Waste

Model Overview & Print Notes

Turn 3D Printing Waste into Fun. Fill transparent shells with 3D printing waste and turn them into playful food-inspired designs, from dumplings and buns to candies,  and popsicles. 1.Food, Reimagined Dumplings, buns, candy, and popsicles take on a playful new form through 3D printing. 2.Waste, on display The transparent shell lets your leftover filament become part of the design instead of being thrown away. 3.Shake It Your Way Fill, shake, hang, and customize—turn leftover filament into a playful piece that's uniquely yours. Tip Pause the print at the specified height, place the prepared 3D printing scraps inside the model, then resume printing until complete. Printing Guide Recommended Filaments PLA+ Transparent / PETG Transparent Dumpling Slicer Settings Layer Height: 0.12 mm Wall Loops: 1 Infill Density: 0 Vertical Shell Thickness: Off Outer Wall Speed: 50 mm/s Inner Wall Speed: 50 mm/s Overhang Speed Reduction: Off Estimated Printing Time 42 min / 1 h Model Dimensions 63 *33*337 mm Bun Slicer Settings Layer Height: 0.12 mm Wall Loops: 1 Infill Density: 0 Estimated Printing Time 1 h33 min Model Dimensions 80* 70 *50 mm Candy Slicer Settings Layer Height: 0.2 mm Wall Loops: 1 Infill Density: 0 Estimated Printing Time 1 h 33 min Model Dimensions 39*39 *98 mm Popsicle Slicer Settings Layer Height: 0.2 mm Wall Loops: 1 Infill Density: 0 Estimated Printing Time 1 h5 min Model Dimensions 39*11*95 mm

Files (1)