StarWars - R5D4

Model Overview & Print Notes

This design has not been cleared with the copyright holder, so it is not allowed to be printed and sold.  For more details, please contact GOODesign's Patreon.  https://www.patreon.com/c/goodesign I finally made R2D2's friend, R5D4, which I had been debating whether to make or not. The reason I was worried is because these supporting characters are so unpopular compared to the time I put into them. However, since there are quite a few customers who want to complete the set, we made it this time. The method of making it is almost the same as R2D2, so it is very easy. However, since there are many parts, there are some things to be careful about. 1. It was designed in an slanted shape to reduce the risk of incorrectly attaching parts. Checking this slope carefully will reduce incorrect attachment. Please check before gluing. 2. The arm must be pulled outward so that it can be rotated down and fixed in its original shape. Be sure to check the video and photos for details. Please look forward to FAB365's Star Wars items that will be released in the future, and please make many requests on the request page. Visit Fab365’s Amazon Storefront for links to the Filaments & Tools we used. Largest part in printing, size= X 98mm, Y 196mm, Z 61mm, After full assembly size= X 72mm, Y 50mm, Z 135mm Total Build Time : 27h 40m / Plastic Weight : 120g

Files (1)