R2D2 ver2 - Starwars

Model Overview & Print Notes

This design has not been cleared with the copyright holder, so it is not allowed to be printed and sold.  For more details, please contact GOODesign's Patreon.  https://www.patreon.com/c/goodesign The Foldable R2D2 , which I designed three years ago, was a huge hit. However, there were various disappointing reactions from customers. The disappointing parts are mainly as follows. 1. Printing often failed due to the arms falling off the bed and shaking. There were many requests for supplements to this. 2. Because the colors were simple, there was a lot of demand for multi colors or color separation. So, we accepted this request and designed version 2.0. Key improvements to Foldable R2D2 include: 1. We created a sturdy support on the outside to prevent the arm from shaking. We also created supports on the inside of the bottom. Now, your arm will never fall off the bed. 2. It is designed to be color-coded so that various parts can be printed and attached separately according to color. It's a bit of a hassle, but the finished product looks amazing! Since there are many parts, there are some things to be careful about. 1. It was designed in an slanted shape to reduce the risk of incorrectly attaching parts. Checking this slope carefully will reduce incorrect attachment. 2. The arm must be pulled outward so that it can be rotated down and fixed in its original shape. Be sure to check the video and photos for details. Now, we hope you can enjoy a more advanced Foldable design that includes color. Visit Fab365’s Amazon Storefront for links to the Filaments & Tools we used. Largest part in printing, size= X 98mm, Y 196mm, Z 61mm, After full assembly size= X 72mm, Y 50mm, Z 108mm Total Build Time : 27h 40m / Plastic Weight : 120g

Files (1)