Mandalorian - Razor Crest

Model Overview & Print Notes

This design has not been cleared with the copyright holder, so it is not allowed to be printed and sold.  For more details, please contact GOODesign's Patreon.  https://www.patreon.com/c/goodesign At the great request of the makers, I designed the Razor Crest, which appears in the Star Wars TV series The Mandalorian, as a print-in-place for 3D printing. I tried to reproduce almost all the moving parts. The air brake of the engine, the hangar at the back, and the door on the side embody the movement. However, some were expressed in a detachable way. Telescopic gate parts or landing gear on the side are implemented as removable. The process of printing and creating is very simple, but there are a few caveats. 1. It is recommended that rear doors and windows be printed using brim. 2. Window parts can be confusing, so try to match them before attaching them. 3. It is convenient to put the back door first. We also designed a display stand that can store these extra parts separately. Please check out this display stand! Go to see Display stand for Razor Crrest There are many production requests from you, but due to circumstances, we cannot produce all of them. However, Fab365 always listens to your opinions and requests, and if circumstances allow, we are trying to respond to your requests. We hope you enjoy printing this item designed at your request! Visit Fab365’s Amazon Storefront for links to the Filaments & Tools we used. 1 : 100 scale Largest part in printing, size = X 96mm, Y 86mm, Z 85mm, After full assembly size= X 208mm, Y 280mm, Z 103mm Total Build Time : 61h 37m / Plastic Weight : 308g

Files (1)