Tie interceptor

Model Overview & Print Notes

This design has not been cleared with the copyright holder, so it is not allowed to be printed and sold.  For more details, please contact GOODesign's Patreon.  https://www.patreon.com/c/goodesign Users who have printed Tie fighter will already notice, but I already had Tie interceptor in mind from the beginning. And this time I designed a tie interceptor. When printing the wing, I made a support wall to form the edge shape well. I also made a support for the upper part of the wing. Please remove these after printing is complete. Caution! When slicing wings, please set as follows. Print speed: 1200 mm/min or less Wall : 4 or 1.6mm The display stand previously designed for the Tie fighter can also be used with this Tie interceptor. Tie fighter display stand ➪ With this, you can now create a battle scene between X-wing, Tie fighter, and Tie interceptor. Please look forward to the next Star Wars series! 1 : 72 Scale Largest part in printing, size = X 77mm, Y 90mm, Z 112mm, After full assembly size= X 112mm, Y 86mm, Z 69mm Total Build Time : 23h 45m / Plastic Weight : 50.1g

Files (1)