Foldable Willys MB Jeep

Model Overview & Print Notes

With the request and high vote from FAB365.net's request page, I designed this foldable Willis Jeep. Willis MB Jeep request ➪ Through this folding Willis MB Jeep, I made my first convertible car. The convertible car requires a lot of work as it is necessary to make a chair and interior, and there is little space to put the structure. In this work, I found it very difficult to make a convertible car by folding it. This time, I inevitably adopted a way to separate the wheels. And some parts were printed and attached separately. The hood can be opened and closed, and the windshield can be rotated forward. The wheels also roll very well. The folding process is as follows. 1. Rotate the front part of the jeep and turn it over. 2. Connect the lower body to the upper body. 3. Close the hood and move the windshield forward and tilt it back. 4. Press and fit each of the four wheels. 5. Put the fuel tank base on the back and put the fuel tank on top. 6. Attach the spare tire to the rear of the vehicle. 7. Cut the filament to a length of 18mm, fit it on the steering wheel, and apply adhesive to the front hole of the driver's seat. Check youtube videos about folding process below. Print on Prusa i3 mk3 and folding process video ➪ Print on Ender 3 pro and folding process video ➪ Print on CR10s and folding process video ➪ Print on Twotrees Bluer and folding process video ➪ Print and folding process video from greg ➪ 1 : 32 scale When expanded, size = X 73mm, Y 104mm, Z 37mm After folding X 50mm, Y 108mm, Z 52mm Design by GOODesign

Files (1)