Vertical Hydroponic Tower System – PVC 110 mm | Base + Net Pots Holders (STL)

Model Overview & Print Notes

Build your own compact vertical hydroponic system with this easy-to-print and modular design. Perfect for growing fresh greens at home with minimal space! 🔧 Features Designed for 110 mm PVC pipe Modular and scalable system Optimized for leafy greens like: Lettuce 🥬 Spinach Arugula Herbs 🧩 Included Parts Large Base Flange (Support Bracket) Provides stable support for the vertical pipe Includes a threaded connection for secure assembly Plant Holders (Net Pot Style) Angled design for better light exposure Promotes good drainage and nutrient flow ⚠️ Important Notes Drill holes in the PVC pipe with a diameter of 2 1/8 inches (~54 mm) for proper fit The thread on the base flange may require light sanding for smooth assembly (depending on your printer calibration) Slight tolerances may vary depending on your printer settings 🖨️ Recommended Print Settings Layer height: 0.2 mm Infill: 15–25% Walls: 3 perimeters Supports: only if needed (depends on orientation) 🧪 Materials PLA (for indoor use) PETG recommended for outdoor or long-term use 💡 Tips Use PTFE tape or silicone to improve sealing if needed Make sure the system is level for proper water circulation Works great with a small aquarium pump 🚀 Ideal For DIY hydroponics enthusiasts Urban gardening Balcony or indoor growing setups Sustainable food production at home ## 3D Printing Settings For best results, use the following settings: Layer height: 0.2 mm Infill: 15–25% Wall/perimeters: 3 Top/Bottom layers: 4–5 Supports: ❗ Required for the male threaded flange Not required for most other parts Plant holders can usually be printed without supports depending on orientation Brim/adhesion: Recommended for the base flange 🧱 Print Orientation Base flange (male threaded): Print flat on the bed → Use supports for the threaded section to ensure proper print quality Plant holders: Print upright to avoid supports and achieve better surface finish

Files (3)